A3. Measuring Pipet, JIS, Custom A

Description

Measuring pipets are straight tubes with graduations (usually at 0.10-1ml intervals) and a tapered end which are not designed to be drained completely.

The operator fills them to a certain level, then dispenses the desired amount of liquid.

Feature

Class A

Accept Customization

Category:

Description

Measuring Pipet, JIS, Custom A

Measuring Pipets. Custom A (class A). graduated for partial delivery

Capacity Graduation interval Tolerance upper outer diameter Length cotton stopper Quantity
Code No. ml ml ±ml mm mm Per Pack Per Carton
021040-01A 0.1 0.001 ±0.005 6.25 300 X 10 350
021040-02A 0.2 0.002 ±0.005 6.25 300 X 10 350
021040-03A 0.3 0.002 ±0.005 6.25 300 X 10 350
021040-05A 0.5 0.005 ±0.005 6.25 300 X 10 350
021040-1A 1 0.01 ±0.010 7 360 10 350
021040-2A 2 0.02 ±0.015 7.5 360 10 350
021040-3A 3 0.02 ±0.03 7.5 360 10 350
021040-5A 5 0.05 ±0.03 7 366 10 240
021040-10A 10 0.1 ±0.05 8 370 10 240
021040-20A 20 0.1 ±0.1 7.5 435 X 10 180
021040-25A 25 0.1 ±0.1 7.5 455 X 10 180
※Custom A- complies with JIS R 3505 Class A "Volume Tolerance".
* There is a tolerance of ± in the dimensions shown, and () is a reference dimension, so please use it as a guide.
* Items with an A mark at the end of the item code are packaging units. Please be careful about the number of pieces.

Measuring Pipets, custom A (class A), graduated to extreme tip

Capacity Graduation interval Tolerance upper outer diameter Length cotton stopper Quantity
Code No. ml ml ±ml mm mm Per Pack Per Carton
021050-01A 0.1 0.001 ±0.005 6.25 300 X 10 350
021050-02A 0.2 0.002 ±0.005 6.25 300 X 10 350
021050-03A 0.3 0.002 ±0.005 6.25 300 X 10 350
021050-05A 0.5 0.005 ±0.005 6.25 300 X 10 350
021050-1A 1 0.01 ±0.010 7 360 10 350
021050-2A 2 0.02 ±0.015 7.5 360 10 350
021050-3A 3 0.02 ±0.03 7.5 360 10 350
021050-5A 5 0.05 ±0.03 7 366 10 240
021050-10A 10 0.1 ±0.05 8 370 10 240
021050-20A 20 0.1 ±0.1 7.5 435 X 10 180
021050-25A 25 0.1 ±0.1 7.5 455 X 10 180
※Custom A- complies with JIS R 3505 Class A "Volume Tolerance".
* There is a tolerance of ± in the dimensions shown, and () is a reference dimension, so please use it as a guide.